This stuff is yummy. Overnight oatmeal is the easiest breakfast food I've ever had to prepare and it's packed full of healthy fiber, whole grains, calcium and protein. It's served and eaten cold but you can warm it up if you like and the topping options are endless. Once prepared, refrigerate it overnight and by morning time you will have a delicious and nutritious breakfast that you can grab on the go.
The following recipe is basic and makes 1-2 servings. You can prepare the overnight oatmeal base in larger quantities and then separate it into pint size mason jars or like below, prepare it all in a quart size mason jar.
What you need:
1 quart size mason jar with lid and rim
Uncooked Rolled Oats
Milk
Plain or Vanilla Yogurt
Toppings - I will be using almonds, cranberries and honey
What to do:
For the base, pour 1 cup oats, 3/4 cup yogurt, 1 1/4 cup milk into the quart size mason jar. Put the lid on and shake well. Basically its 2:1, dairy to oats. The more yogurt, the thicker the base. The less yogurt, the thinner the base.
Now add your toppings of choice. I added a handful of almonds, a handful of cranberries and a tablespoon of honey. Cap it and shake it again! I've also used frozen berries which sweetened it considerably so no added honey necessary. Another delicious version is chopped up green apples and lots of cinnamon. If you double the base, then divide it into pint size mason jars, you could create lots of different flavors. The only hard part is deciding which flavor you want in the morning! Hope you enjoy.
Pin It
3.14.2013
3.05.2013
DIY Burlap Nursery Banner
I wanted to make something special for my little guy and what better than a burlap banner?! There are lots of cute banners on Pinterest and Google so after lots of searching, I pieced together what I think is the best way to make one - it's easy, quick, cheap and super cute.
You can make the banner pieces any size you would like and depending on what you want the banner to say, keep in mind how big/small it will be once hung. I knew that I wanted my banner to hang across a wide wall and that it would contain nine letters so when I made my template, I made sure to size the triangles accordingly at 6" wide and 7.5" long. I think the total cost of this project was under $5 because I already had a lot of things around the house like the heavy paper, ruler and permanent markers. The burlap was less than $2 at Jo-Anns, the yarn less than $3 and the clothespins are from the Dollar Tree.
With a permanent marker, trace your banner pieces with the template onto the burlap. In my case, I traced 9 triangles then cut them out. Since burlap is woven, it can come apart easily so I cut outside the lines in case parts came unwoven and I needed to trim. If your burlap is wrinkled, iron it straight.
Pin It
You can make the banner pieces any size you would like and depending on what you want the banner to say, keep in mind how big/small it will be once hung. I knew that I wanted my banner to hang across a wide wall and that it would contain nine letters so when I made my template, I made sure to size the triangles accordingly at 6" wide and 7.5" long. I think the total cost of this project was under $5 because I already had a lot of things around the house like the heavy paper, ruler and permanent markers. The burlap was less than $2 at Jo-Anns, the yarn less than $3 and the clothespins are from the Dollar Tree.
What you need:
1 yd burlap
1 piece heavy paper
Ruler
Permanent marker
Scissors
Cotton yarn or twine
Clothespins
Sewing machine + thread
Computer + printer
What to do:
Create a triangle template with your heavy paper. I drew a horizontal 6" line and put a dot at the 3" mark. From the 3" mark, I drew a vertical 7.5" line. I then drew out the triangle by connecting the tip of the vertical line with the edges of the horizontal line.With a permanent marker, trace your banner pieces with the template onto the burlap. In my case, I traced 9 triangles then cut them out. Since burlap is woven, it can come apart easily so I cut outside the lines in case parts came unwoven and I needed to trim. If your burlap is wrinkled, iron it straight.
With a sewing machine, sew along the edges of the triangles as close as possible to prevent the burlap from coming apart.
Find a font for your banner. There are a few websites where you can download fonts for free and I used "Typewriterhand" from dafont.com in size 350. You may have to play around with font sizes because at this point, you have a specific space on your triangles where the font can fit and you don't want the font to be too large or too small. Once you have your letters typed up, print them out and you can start your letter tracing. Place your burlap over the paper and with a permanent marker, trace the edges of the letter onto the burlap triangles. Fill in the letters a couple times over and voila! Repeat for each letter you need.
Next, cut your yarn or twine to the length you want for hanging. Arrange your letters and hook onto the yarn with the clothespins. Hang where you like and you are done! You should know have a beautiful DIY burlap banner.
Subscribe to:
Posts (Atom)